How to drive an electric patrol car

Now, compared with the environment-friendly and green electric patrol car, the oil-fired car has been gradually replaced. The electric patrol car has emerged in people's vision with its unique advantages and has been quickly put into the market. The demand for patrol car drivers is also increasing.

Electric patrol car first of all to choose the battery, to choose lithium battery, because of large electric capacity, less natural consumption, less pollution, second to choose lead dry battery, because the seal is good, electrolyte is not easy to leak, must avoid electrolyte leakage and damage pollution, corrosion, the body.

Driving method and operation procedure of electric patrol car:

1. First, insert the key into the power switch and turn it to the ON position.

2. Press the green part of the direction selector to the forward position.

3. Release the parking brake, press the clutch pedal, adjust the shift lever to low gear, release the clutch, and press the accelerator pedal evenly to start the car.

4. When parking, release the accelerator pedal and slowly press the brake pedal. When the vehicle stops, pull the parking brake.

The power supply voltage of some electric patrol cars reaches or exceeds 96 volts, which is much higher than the safety voltage threshold. It is very easy to have some electric shock accidents, so we should pay extra attention to it.

We should always check the electric patrol car circuit plug points to prevent the connection, contact ignition and heating caused by poor contact. To avoid the aging of the line, wear and tear caused by short circuit and string accident.